Cleaning and maintaining your tankless water heater are necessary to keep it working well. Doing so will cut back on needless costly repairs that could have been avoided otherwise. This way, it will provide years of useful service and true value for money.
Here are 5 tips for helping to keep your tankless water heater in good condition.
- Check the T & P valve
The T &P valve is essentially the safety valve. The valve is used to vent heat and pressure beyond the normal limits that occurs when heating water in a condensed location. Checking this valve’s functionality is important.
- Raise the T & P lever halfway and let it flip back into its natural position
- You should hear the sound of water bubbling due to the valve allowing the water down the drain
- If you don’t hear a thing, then the valve likely has malfunctioned. Stop using the heater immediately and call a professional to service the machine.
- Adjust the Temperature
The default setting for many tankless heaters is around 125-130 degrees Fahrenheit. This is too high. The temperature can be dropped to 115 degrees or so. This lessens the possibility that the heater will ever get to a stage of overheating and cuts your energy bill too.
- Cleaning the Water Heater Exterior
Delicately cleaning the exterior of the systems for your tankless water heater avoids it building up an unnecessary residue. Whether that’s a cloudy covering over the LCD display or readout gauges, or wiping down the casing to keep it pristine, it all helps to avoid problems later.
Clean the lines to remove dust and debris from them. Keep them unburdened. Use a cleaning sponge to wipe and avoid smearing or marking what you clean.
- Check Performance
Is your tankless water heater functioning as it should? Does it seem to keep to the temperature it’s been set to or does it seem too hot or too cold? Is the readout providing correct information as far as you can tell? Are the valves functioning as they should? Does the water heat up as quickly as it did when you first for the water heater installed or does it take longer now?
- Annual Inspection
Any type of water heater requires a periodic inspection to give the entire system a good once over. A trained professional who holds the right certifications for their field should be used. Not any plumber will do. If they have specific experience working with tankless water heaters, all for the better. For detail inspection checklist you have to visit http://www.tanklesswaterheaterworld.com/ website where you have fine depth detail about tankless water heater installation and maintenance.
They should be inspecting the burner apparatus, cleaning it and checking it. The exhaust that’s used in oil-based and gas-based models need examining and repairing where needed. A visual and practical check for corrosion developing or active leaks is necessary. Any models that use an anode rod which was common with aging tankless heaters should be swapped out now.
As long as you keep your maintenance and cleaning protocols in place, you shouldn’t have a problem with your tankless water heater.